Showing posts with label reflection. Show all posts
Showing posts with label reflection. Show all posts

Saturday, July 30, 2011

Domed versus Flat Crystals

Flat crystals have their place in the scheme of things, I suppose, but the one annoying thing is reflections - especially from nearby lamps. By comparison, a domed crystal makes a reflection smaller and, if the underside is equally curved, it's reflection is also smaller. For example, this Stocker & Yale model 490's flat glass crystal shows no mercy when it's under a desk lamp.
The standard flat crystal on this watch is 30mm diameter and 1.5mm thick. A 30mm, 2mm thick, "double domed" mineral glass crystal was purchased for $7, installed, and the result was excellent:
The two pictures were taken at the same distance and in the same position. The lamp distance was about a foot above the watch. The domed crystal has an unpolished chamfer on the top and the crystal projects about a 1/2 mm from the anodised aluminum flat-topped bezel:
The side view is much improved. The angularity of the bezel is relieved by the domes' curve, which itself complements the curved chamfers formed on the side of the plastic body.
 Was thinking of selling this watch, but now it's keeper!!
Best regards, xpatUSA

Monday, October 22, 2007

An Accidental Sparkle!

As I recall, you can buy a special filter to get the sunburst effect - but the tiny sparkle below, just above the balance jewel, was completely accidental and no filter was used!

gruen movement

My setup uses three lamps, hence the six-pointer. You'll notice that the angles between the points and the point intensities are not equal because of my unequal lamp placements and distances.

So, how did the sparkle appear? The light from each lamp hits the curved bevel on the regulator and is reflected up into the camera's field of view. Even though the lamps have diffusers on them, the single curvature concentrates the reflected light and gives a fan shaped reflection beam rather than a spot beam. The "accident" occurred due to the exposure setting used. It was enough to saturate the image at the center of the sparkle but to have less and less saturated area going outwards along each reflection beam.

cheers,

xpatUSA